Buffer tank 150L SUS304 G1"F

Buffer tank for Heatpump system  150L 

This is an electric water tank used to obtain and store hot water, and can also be used for solar energy, heat pumps, boilers, etc.
The buffer water tank is an insulated pressure tank with a pressure of 0.76MPa.
Make sure there is plenty of hot water available.
The product is suitable for indoor and outdoor installation, and can be placed in an appropriate position according to the size of the space position.

Product performance:
* High efficiency -- the use of EU standard polyurethane foam, uniform foaming without bubbles, 24 hours only drop 6 degrees Celsius.
* Environmental protection
* Durability -- beautiful appearance, long service life suitable for a wide range of areas.

SST MODEL		PWT-150L(buffer tank)
NOMINAL CAPACITY	L	150
OUTER TANK DIAMETER	mm	Φ470
INNER TANK DIAMETER	mm	Φ370
HEIGHT	mm	1415
INNER TANK MATERIAL		SUS304
INNER TANK THICKNESS	mm	1
OUTER CASE MATERIAL		Galvanized Sheet with Painting
ELECTRICAL HEATER TYPE		No
CONNECTIONS	Temp.sensor hole	G1/2"
	Hotwater outlet	G1''
	Heat Exchanger coil	/
	inlet/outlet
	Cold water inlet	G1''
	Circulation	G1''
	T/P connection	G1/2"
Mg.anode		No
WORKING PRESSURE	Bar	6
MAX.TESTING PRESSURE	Bar	10
INSULATION		Polyurethane Foaming
INSULATION THICKNESS	mm	50
PACKING SIZE	mm	540*540*1560